Circle Flamer X-F3600 ​

Usage: Professionals, stages, tv, events ect.

X-F3600 is a flameprojector with a moving jethead that can turn 360° in a circle. One complete turn takes 480ms. More than 94 pre-installed sequences can directly be started. ​
The projektor can be controlled viaDMX, our ZK6200 or an ignition impulse of an external ignition system, 9-60 Volt. It is fueled with bioethanol which is brought into the device by a high-pressure pump and then shot out precisely. 

The device can create flames up to 10m height. The fuel tank has a capacity of 10 liters. To guarantee a safe use the device is equipped with a tilt sensor, pressure monitor, safetywarning and a consumption alarm.

X-F3600 can work via Powercon or 12 Volt (battery input). There is a  5-Volt-exit to directly connect Wireless DMX. Thus the flamer can work completely wireless.

Scope of supply:

• X-F3600 Circle Flamer

• Case

• Wheels

• 10 liter Tank

uFlamer

uFlamer is a global pioneer of vertical fluid driven flamer, with flame height up to 8-10m. Equipped with built-in fuel tank and pumping system makes it super easy to setup and operate. The fuel for uFlamer is ISOPAR, which is much safer as well as less restrictions comparing with existing gas flamers on the market.IPX3 rated design and indoor nozzle optional ensure flexible usage of uFlamer.

Features

• Fluid driven vertical flamer original designed by SHOWVEN

• Flame up to 8-10m (no wind)

• Super compact pumping system design, easy carrying

• Stainless steel housing, reliable and durable

• IPX3 waterproof design

• Built-in 5L fuel tank, equals to 83s effects. Support external tank

• No external hose connection needed, easier for setup

• Safety lock with switchable test mode, safer for service

• Tilt protection, the tilt sensor will be activated when machine slant Over 45°.

• Intelligent control system, safer for use

• Standard DMX control

• Machine running status monitoring with SHOWVEN host controller

• Built-in battery design (Optional, and customer can buy battery locally)

uFlamer Volcano

uFlamer Volcano is five-heads plug and play liquid flamethrower, with each head can be controlled independently. Volcano with more than 90 preset firing sequences, 25L built-in stainless steel fuel tank, and support automatic refueling system. It is an ideal choice for fireworks displays, outdoor concert, opening ceremony, sports, scenic area etc.

Features

• 5-heads liquid flamer

• Independent control of each head

• Internal pump, plug and play system

• Flames up to 10m

• Reinforced stainless steel housing

• 25L built-in stainless steel fuel tank

• Support automatic refueling station

• Real-time fuel level display, both electronically and mechanically

• Safety switch

• Integrated valve block design

• Customized water-proof ignitor

• IPX3 rain-proof, can be used in rain

• DMX control, with both 3-pin and 5-pin XLR port

• Compatible with fireworks firing system

uFlamer Gasboom

uFlamer Gasboom is the safest gas flamer ever on the market, with a series of safety features including 0.1s super sensitive flame monitoring, cascadable power cut-off E-stop connector, dual high voltage electron igniter, patented “SFT” technology, safety lock, dual magnetic valves, shut-off valve, ARM warning light etc. With 5 types of nozzles optional, 2/4 built-in gas cartridges positions, flame effect height from 2 to 8m ensure versatile applications for both indoor and outdoor events.

Features

• Patented SFT technology allows Gasboom with stronger burst and no flame tails after firing even in
  low temperature environment.
• Super sensitive flame monitoring ensures that the fuel supply is switched off if the flame does not ignite
  after as short as a 0.1s firing duration
• Cascadable power cut off E stop connector, all flamers can be controlled with a single E stopper box.
• Dual high voltage electron igniter ensure successful ignition
• Dual magnetic valves installed in series for doub le safety
• Individual shut off valve for each canister
• Built-in battery design
• 2/4 (optional) built in gas cartridges positions
• 5 types of nozzles optional, 2-8m effects
• Stainless steel housing, reliable and durable
• Waterproof design , can be used in heavy rain
• Safety lock with switchable test mode , safer for service and testing
• Tilt protection, the tilt sensor will be activated when machine slant over 45°

FXcommander

The FXcommander is designed to be a professional while intuitive control solution for SFX and Pyro engineer, it allows to control all DMX device such as SPARKULAR, FLAMER, FOG, HAZE, CONFETTI etc. in a safe and professional way. Together with our original slaves it can also programming fireworks display wirelessly. Take advantage of the 10.1 inch capacitance touch screen and powerful software system, it allows FX operators edit a show in a few minutes, everything in the system are intuitively designed, no lighting console operation background needed. Large scale shows with special effects and fireworks can be sync with music precisely through our professional windows software FXcommander_Editor. The FXcommander is setting the safety standard for the special effects control.

Features

Professional DMX & Pyro Console

• A dedicated console for SFX device and fireworks set off

• Customized for SFX operator to control FX device professionally and safely

Next Level Safety for Special Effects Control

• Pyro arm switch, DMX arm switch, Deadman button ensure zero false trigger

• PANIC - Emergency stop at any time

• Safety channel specially designed for SFX device

• Dual antenna, ensure fast, stable and reliable PYRO signal transmission

• RDMX communication with SHOWVEN device, device status real time monitoring

• 8 keyboard shortcut key, can set to tap or lock mode, ensure quick and reliable trigger

Intuitive Programming and Operation

• 10.1" capacitance touch screen

• Presetting device and effect lib for fast programming

• 5 preset effect rules for easier programming

• Easy and fast improvisation programming

• Convenient manual pyro firing edit

• Demonstration function for programmed show

Powerful

• Scene switch, max. support 4 scenes, each scene support 128 cues

• USB port support software update, show file update and backup, device lib update etc.

• Variety interfaces: 3-pin and 5-pin DMX, MIDI input, LTC input, Audio Output, USB

• Wireless: 2.4GHz wireless DMX signal, dual band wireless pyro signal

• Battery driven with built in battery Windows FXcommander_Editor Software can generate project list table, minimize operator’s workload.

Precise Control and Sync with Music

• Dual-core processor, smooth operation

• MIDI, LTC receiver, support SMPTE time code

• Windows FXcommander_Editor Software ensure precise programming

• Built-in audio signal output, achieve accurate synchronization between music and effects

Personalization Settings

• Multi language optional 

• Unlimited self-editable colors 

• User defined CUE icon