Our innovative flamesystems allow you to create creative and breathtaking flameshows. The moving-head-jet produces fireshots in fractional seconds to all directions.

New and innovative is the trigger-in: a pre-installed sequence can be started by an ignition system.

With all of our systems we highly value safety, quality and precision. All devices are high quality processed and have safetysensors as well as 2 high pressure pumps and a doublevalve to satisfy our safety claims.



Circle Flamer X-F1800 ​


Usage:

Professionals, stages, tv, events ect.

 

Our X-F1800 is a flameprojector with a moving jethead that can turn 210° from left to right (-105 - +105°) in 340ms. More than 70 pre-installed sequences can directly be started. ​
The projektor can be controlled viaDMX, our ZK6200 or an ignition impulse of an external ignition system, 9-60 Volt. It is fueled with bioethanol which is brought into the device by a high-pressure pump and then shot out precisely. 

The device can create flames up to 10m height. The fuel tank has a capacity of 10 liters. To guarantee a safe use the device is equipped with a tilt sensor, pressure monitor, safetywarning and a consumption alarm.

X-F1800 can work via Powercon or 12 Volt (battery input). There is a  5-Volt-exit to directly connect Wireless DMX. Thus the flamer can work completely wireless.

 

Scope of supply:

  • X-F1800 Circle Flamer

  • Case

  • Wheels

  • 10 liter Tank

Technical Data:

Dimensions: 590mm x 360mm x 370mm
Weight: 35kg
Effect height: 10m
Control: ​DMX, 3 or 5 pol. or Controller ZK6200

Connections: Neutrik
Power consumption: 350W

Consumption: 60ml/sec.
Working temperature: -10°C to 50°C
Case: Metall

GTIN (EAN) 9120082400213

CE-Zertificate

CE-Zertificate

RoHS

 

Circle Flamer X-F3600 ​
 

Usage: Professionals, stages, tv, events ect.
 

X-F3600 is a flameprojector with a moving jethead that can turn 360° in a circle. One complete turn takes 480ms. More than 94 pre-installed sequences can directly be started. ​
The projektor can be controlled viaDMX, our ZK6200 or an ignition impulse of an external ignition system, 9-60 Volt. It is fueled with bioethanol which is brought into the device by a high-pressure pump and then shot out precisely. 

The device can create flames up to 10m height. The fuel tank has a capacity of 10 liters. To guarantee a safe use the device is equipped with a tilt sensor, pressure monitor, safetywarning and a consumption alarm.

X-F3600 can work via Powercon or 12 Volt (battery input). There is a  5-Volt-exit to directly connect Wireless DMX. Thus the flamer can work completely wireless.

 

Scope of supply:

  • X-F3600 Circle Flamer

  • Case

  • Wheels

  • 10 liter Tank

Technical Data:

Dimensions: 640mm x360mm x370mm
Weight: 35kg
Effect height: 10m
Control: ​DMX, 3 or 5 pol. or Controller ZK6200

Connections: Neutrik
Power consumption: 350W

Consumption: 60ml/sec.
Working temperature: -10°C to 50°C
Case: Metall

GTIN (EAN) 9120082400220

CE-Zertificate

CE-Zertificate

RoHs

 

uFlamer


uFlamer is a global pioneer of vertical fluid driven flamer, with flame height up to 8-10m. Equipped with built-in fuel tank and pumping system makes it super easy to setup and operate. The fuel for uFlamer is ISOPAR, which is much safer as well as less restrictions comparing with existing gas flamers on the market.IPX3 rated design and indoor nozzle optional ensure flexible usage of uFlamer.

 

Features

  • Fluid driven vertical flamer original designed by SHOWVEN

  • Flame up to 8-10m (no wind)

  • Super compact pumping system design, easy carrying

  • Stainless steel housing, reliable and durable

  • IPX3 waterproof design

  • Built-in 5L fuel tank, equals to 83s effects. Support external tank

  • No external hose connection needed, easier for setup

  • Safety lock with switchable test mode, safer for service

  • Tilt protection, the tilt sensor will be activated when machine slant Over 45°.

  • Intelligent control system, safer for use

  • Standard DMX control

  • Machine running status monitoring with SHOWVEN host controller

  • Built-in battery design (Optional, and customer can buy battery locally)

Technical Data:

Dimensions: 330 x 260 x 320 mm
Weight: 14kg
Input and Power: 100-240VAC, 50/60 Hz 300W
Housing Material: 304 stainless steel
Effect Direction:
Vertical
Flame Height:
8-10m (no wind)
Fuels:
ISOPAR G, H, L, M, ISOPROPANOL
Fuel Tank Capacity:
5.0L
Fuel Consumption Rate:
Nozzle M: 60ml/s
Interface:
NEUTRIK POWERCON TRUE1 IN/OUT Waterproof 3-pin and 5-pin XLR IN/OUT
Control:
DMX
Ignition:
High Voltage Electron Ignition
Built-in Battery Design:
Yes, Battery optional
Waterproof Level:
IPX3


CE-Zertificate

CE-Zertificate

CE-Zertificate

Manual

 

uFlamer Volcano


uFlamer Volcano is five-heads plug and play liquid flamethrower, with each head can be controlled independently. Volcano with more than 90 preset firing sequences, 25L built-in stainless steel fuel tank, and support automatic refueling system. It is an ideal choice for fireworks displays, outdoor concert, opening ceremony, sports, scenic area etc.

 

Features

  • 5-heads liquid flamer

  • Independent control of each head

  • Internal pump, plug and play system

  • Flames up to 10m

  • Reinforced stainless steel housing

  • 25L built-in stainless steel fuel tank

  • Support automatic refueling station

  • Real-time fuel level display, both electronically and mechanically

  • Safety switch

  • Integrated valve block design

  • Customized water-proof ignitor

  • IPX3 rain-proof, can be used in rain

  • DMX control, with both 3-pin and 5-pin XLR port

  • Compatible with fireworks firing system

Technical Data:

Dimensions: 630 x 450 x 400 mm
Weight: 48kg
Input and Power: 200-240VAC, 50/60 Hz 100 -120VAC, 50/60 Hz

Work power 2000W
Single head flame height 8-10m
Flame angles 5
Fuel ISOPAR G, ISOPROPANOL
Built in fuel tank capacity 25L
Ignition High voltage electron ignition Control DMX, Fireworks firing system

Water proof level IPX3
Interface 3-pin and 5-pin XLR

 

Adobe PDF CE-EMC

Adobe PDF Spec

Adobe PDF User Manual

FXcommander
 

The FXcommander is designed to be a professional while intuitive control solution for SFX and Pyro engineer, it allows to control all DMX device such as SPARKULAR, FLAMER, FOG, HAZE, CONFETTI etc. in a safe and professional way. Together with our original slaves it can also programming fireworks display wirelessly. Take advantage of the 10.1 inch capacitance touch screen and powerful software system, it allows FX operators edit a show in a few minutes, everything in the system are intuitively designed, no lighting console operation background needed. Large scale shows with special effects and fireworks can be sync with music precisely through our professional windows software FXcommander_Editor. The FXcommander is setting the safety standard for the special effects control.

 

 

Features


Professional DMX & Pyro Console

  • A dedicated console for SFX device and fireworks set off

  • Customized for SFX operator to control FX device professionally and safely

 

Next Level Safety for Special Effects Control

  • Pyro arm switch, DMX arm switch, Deadman button ensure zero false trigger

  • PANIC - Emergency stop at any time

  • Safety channel specially designed for SFX device

  • Dual antenna, ensure fast, stable and reliable PYRO signal transmission

  • RDMX communication with SHOWVEN device, device status real time monitoring

  • 8 keyboard shortcut key, can set to tap or lock mode, ensure quick and reliable trigger

 

Intuitive Programming and Operation

  • 10.1" capacitance touch screen

  • Presetting device and effect lib for fast programming

  • 5 preset effect rules for easier programming

  • Easy and fast improvisation programming

  • Convenient manual pyro firing edit

  • Demonstration function for programmed show

 

Powerful

  • Scene switch, max. support 4 scenes, each scene support 128 cues

  • USB port support software update, show file update and backup, device lib update etc.

  • Variety interfaces: 3-pin and 5-pin DMX, MIDI input, LTC input, Audio Output, USB

  • Wireless: 2.4GHz wireless DMX signal, dual band wireless pyro signal

  • Battery driven with built in battery Windows FXcommander_Editor Software can generate project list table, minimize operator’s workload.

 

Precise Control and Sync with Music

  • Dual-core processor, smooth operation

  • MIDI, LTC receiver, support SMPTE time code

  • Windows FXcommander_Editor Software ensure precise programming

  • Built-in audio signal output, achieve accurate synchronization between music and effects

 

Personalization Settings

  • Multi language optional 

  • Unlimited self-editable colors 

  • User defined CUE icon

Specifications:

Dimensions: 314×270×65mm mm
Weight: 4kg
Input:  100-240VAC, 50/60 Hz
Work Power: 20W
Casing material: Aluminium
Battery powered: yes
Wireless function: 
2.4G wireless DMX
Dual band wireless PYRO
Interface: 
1x USB
1x USB Download
1x LAN
1x Audio Output
1x MIDI IN
1x LTC IN
1x 3-PIN DMX OUT

1x 5-PIN DMX OUT

1x External Trigger

 

Adobe PDF CE-RED

Adobe PDF ROHS

Adobe PDF User Manual

Adobe PDF Spec